For Nissin digital flashes & Original flashes

Wireless system
Radio category

Radio specifications
2.4GHz ISM band (Obtaining technical standards conformity certification)

8 channels, auto select or manual select

Flash Groups
A, B, C (3 Groups)

Power Source
2 x AAA batteries

Guide no. mode
Low GN mode/ High GN mode (default)

EV compensation on flash:
[TTL] -2.0~ +2.0, 1/2EV step [manual] 1~1/128 (8 steps) Each group can be adjusted independently or synchronized

Manual output:
8 steps of Manual output 1/128 - 1/64 - 1/32 - 1/16 - 1/8 - 1/4 - 1/2 - 1/1 (Full) power

Manual zoom:
Manual adjustment (24/ 35/ 50/ 70/ 85/ 105/ 135/ 200 mm)

Continuous shooting speed
10 shots/sec

Number of flashes (Approx.)
5,000 flashes

Transmission distant
Max. 30m (Depending on the environment)

High speed synchronization
1/8,000sec (controlled by NAS commander.)

Built in stand, Cold shoe, 1/4” Tripod Lug

External syn socket
Standard PC sync cable

TTL, M , M zoom, no setting is needed, all set at NAS commander

Synchronization modes
No setting is need, controled by NAS commander.

Built in stand, Cold Shoe/ 1/4” Tripod Lug

 65(L) x 60 (W) x 50 (H)mm/ 2.6(L) x 2.4(W) x 2 (H)inch

55g / 1.9oz (without batteries)

Notice: Design and specification are subject to change without prior notice.

*1:Not compatible with Nissin Battery Magazine BM-01

*2:Not correspond to the wireless optical TTL master. Can be set as A/B/C group (Group RMT/ RMT 2/ RMT M for Sony Version)
*3:SD - Slave Digital (synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon, i-TTL for Nikon and ADI/P-TTL for Sony) mode
SF - Slave Film. synchronizes to the traditional single flash system. The master flash is to be set at manual mode. Studio lighting system synchronizes to this mode. This mode is also available for open flash, and for a standard flash in the market.